▰ShearBeamLoadCellRequest a quote
Menu

SBL-SE / CONFIGURATION FAMILY

Single-Ended Alloy Steel Shear Beam Load Cell

Four-corner floor scales, belt weighers and industrial hoppers

Single-Ended Alloy Steel Shear Beam Load Cell conceptual load-path drawing

Conceptual schematic. Request the capacity-specific dimensional drawing.

Specify SBL-SE around the installation.

Two fixing holes secure one end to a rigid base. Introduce vertical load at the free end through the specified foot or mounting hardware.

Selection scope
100 kg–10 t / 250–20,000 lb
Material request
Nickel-plated alloy steel
Protection request
IP67 configuration requested
Electrical configuration
Confirm 2.0 / 3.0 mV/V, excitation and input/output resistance for the selected cell; specify cable length and four- or six-wire functions.
Load introduction & mounting interface
Request metric M12 / M18 / M20 / M24 or 1/2″-20 UNF / 3/4″-16 UNF as applicable to the selected capacity. Verify pitch, engagement and loading height.

What arrives with your quotation?

The selected drawing, capacity and overload limits, signal specification, cable wiring, mounting BOM and any available model-specific test or approval documents.

These pages describe configuration families. Availability, matching tolerance, certification and dispatch date are confirmed for the selected order. Metric tonnes and imperial lb ranges are separate nominal selections.

Download the SBL specification checklist