100 kg\u201310 t / floor scales, belts & hoppers
Single-Ended Shear Beam Load Cells
Fix one end to a rigid, flat base and introduce load at the opposite end. Select the exact capacity, installation height, loading thread and suitable foot together.
Single-Ended Alloy Steel Shear Beam Load Cell
100 kg–10 t / 250–20,000 lb
Four-corner floor scales, belt weighers and industrial hoppers
Select configurationStainless Steel Single-Ended Shear Beam Load Cell
100 kg–10 t / 250–20,000 lb
Wet-process platforms and stainless tank systems
Select configurationCheck the load path before the rating.
Capacity per cell must accommodate tare, maximum contents, uneven loading and dynamic effects. Dividing total weight by the number of supports alone is insufficient.
Feet and modules control load introduction but do not eliminate all side load, impact or installation error. Use the specified fasteners, torque and clearances.
Keep the mechanical and electrical interfaces together.
Compare total length, width, height, mounting pitch, loading height, thread pitch and depth. Then confirm sensitivity, excitation, output resistance and four- or six-wire connections.
For parallel kits, agree sensitivity/output-resistance matching and summing-box channel count. Final on-site corner adjustment remains required.
DIMENSIONS. LOAD PATH. SIGNAL.
Get the complete weighing kit specified.
Send capacity per cell, support count, thread standard and your existing drawing.